Artech Church Interiors has the experience and knowledge necessary to meet the challenges of your church
construction needs. We have done everything from constructing new pulpit platforms to installing baptismal
pools to new flooring and plaster repair or any phase of construction. We are happy to meet with you
and discuss your project in detail. Contact us and see what we can do for you.
Our "families" of craftsmen renovate churches nationwide. The bonding that
develops between our people is one of the many qualities that make our system work efficiently.
After your church's renovation is accomplished - on time - Artech Church Interiors doesn't end the
relationship there. Follow up is a matter of course. Renovation department personnel are continually
available to answer any questions and address any warranty work required.
When this congregation decided it was time for a renovation they came to Artech Church Interiors. We worked
with them for every stage of the project from visual renderings of what the completed church would look like
to the final setup of the accouterments in the pulpit area. After our interior design plans were accepted
we began the renovation. The first step was remove everything. They had 2 styles of pews in the sanctuary
and these were taken out. The carpet was torn up and the pulpit platform was torn down. The floor was cracked
and uneven so we poured new concrete. The walls were plastered and painted. A new pulpit platform was built
and a baptismal pool was installed in the rear. A moveable floor section was created to cover the pool so
the choir could be set up there. The floor was re-carpeted. The new pews were brought in and carefully
assembled on site and their new chairs were set up.
|
|
|
|
Click to enlarge |
Click to enlarge |
|
|
|
|
Click to enlarge |
Click to enlarge |
|
|
|
|
Click to enlarge |
Click to enlarge |
|
|
|
|
Click to enlarge |
Click to enlarge |
This church contacted Artech for a complete renovation. The church knew it wanted a change but did not
have anything down on paper. Artech met with them several times and we were able to get a feel for what
they would want and we put together the plans and renderings we presented to them. They were very pleased
with our designs and we began the renovation work. We started by pulling up the old carpet and parquet
flooring and pulling down the old sheetrock on the walls and ceiling. We re-insulated the building, sheet
rocked the walls and replaced the ceiling. The church wanted a new pulpit platform built. New hardwood
floors were laid on top of the concrete and the vestibule and pulpit platform were carpeted. The walls were
painted. We installed new lighting fixtures that would now give them sufficient light and supplied them with
chairs. We built a new custom Plexiglas pulpit for them with the church logo and new custom doors were built
for the church entrance. We also built a sound room in the rear of the sanctuary.
|
|
|
|
Click to enlarge |
Click to enlarge |
|
|
|
|
Click to enlarge |
Click to enlarge |
|
|
|
|
Click to enlarge |
Click to enlarge |
|
|
|
|
Click to enlarge |
Click to enlarge |
